Product name
SD Model Bundle Extractor
Pipe bundle length
6000-15000mm
Pipe bundle diameter
1000-2800mm
Maximum force
15-100T
Total power
9-22.5Kw
Bundle Extractor
Decimal Point International Trade (Dalian) Co., Ltd. has independently developed the SD series of upper-support type tube bundle extractors. This type of heat exchanger extractor is designed with systematic planning, clever and flexible functions, simple and convenient operation, and is safe and reliable to use. The design is straightforward and practical, with a perfect and smooth appearance.
Characteristics
Good safety and high structural strength.
The machine has been checked for structural strength by the Department of Concrete Structures, Dalian University of Technology, and has been optimized for structural design. It not only meets the requirement of structural strength, but also makes the weight as light as possible.
The drawing and assembling is smooth and fast.
Use chain to draw the tube bundle, with strong power. The drawing and assembling is smooth and fast.
Manual, remote and wire control systems
Manual, remote and wire control systems ensure the safety of operators and are flexible and convenient to use.
Low failure rate, good maintainability.
In the design, the harsh site environment and the inevitable strong collision are fully considered, the vulnerable parts are reliably protected and anti-pollution isolation is trolleyried out. So the failure rate is very low. All parts of the machine are standard and can be easily purchased even if damaged.
Electric bundle extractor technical performance
Model | Pipe bundle length(mm) | Pipe bundle diameter(mm) | Maxi mum force(T) | Maxi mum load(T) | Dead load(T) | Boundary dimension(length ×width ×height) mm | Totalpower(Kw) |
|---|---|---|---|---|---|---|---|
SD100- 6D
| 6000 | 1000 | 15 | 20 | 3.5 | 9600×1200×1200 | 9 |
SD120- 6D | 6000 | 1200 | 20 | 20 | 3.5 | 9600×1400×1200 | 13.2 |
SD140- 6D | 6000 | 1400 | 30 | 30 | 4.8 | 9600×1600×1230 | 13.2 |
SD180- 6D | 6000 | 1800 | 40 | 40 | 6.1 | 9600×2000×1300 | 17.2 |
SD180- 9D | 9000 | 1800 | 45 | 45 | 6.9 | 12600×2000×1300 | 17.2 |
SD180-12D | 12000 | 1800 | 45 | 45 | 9.3 | 15600×2000×1300 | 18 |
SD200- 6D | 6000 | 2000 | 45 | 45 | 7.8 | 9600×2200×1350 | 18 |
SD200- 9D
| 9000
| 2000
| 50 | 50 | 8.5 | 12600×2200×1350 | 18 |
SD200-12D | 12000 | 2000 | 55 | 55 | 9.1 | 15600×2200×1350 | 18 |
SD220- 9D | 9000 | 2200 | 60 | 60 | 9.6 | 12600×2400×1450 | 18 |
SD220-12D | 12000 | 2200 | 65 | 65 | 10.8 | 15600×2400×1450 | 21.5 |
SD240- 9D | 9000 | 2400 | 70 | 70 | 12.3 | 12600×2600×1550 | 21.5 |
SD240-12D | 12000 | 2400 | 75 | 75 | 13.2 | 15600×2600×1550 | 21.5 |
SD260- 9D | 9000 | 2600 | 80 | 80 | 16.1 | 12600×2800×1750 | 22.5 |
SD260-12D | 12000 | 2600 | 85 | 85 | 17.2 | 15600×2800×1750 | 22.5 |
SD260-15D | 15000 | 2600 | 90 | 90 | 18.8 | 18600×2800×1750 | 22.5 |
SD280-12D | 12000 | 2800 | 95 | 95 | 19.3 | 15600×3000×1770 | 22.5 |
SD280-15D | 15000 | 2800 | 100 | 100 | 20.2 | 18600×3000×1770 | 22.5 |
Important safety measures and precautions
DO'S
1.The machine should be stored in a place with flat ground and sheltered from rain.
2.The steel cable selected for hoisting the machine should match the hoisting load.
3.Make sure the machine is in the set initial position when starting up and shutting down.
4.Operator should wear safety belt when operating above 2 meters.
5.The hydraulic oil of the corresponding model should be replaced according to the temperature of the use area.
6.The manual operation button is the emergency operation button. To ensure the safety of operators, remote control should be the first choice. The second option is wire control in case of remote control failure or damage. Manual control can only be used when remote control and wire control are out of order or damaged. As soon as the drawing and assembling of tube bundle is finished, the fault of remote control and wire controller should be eliminated immediately before the machine can be used.
7.All personnel on site shall retreat to a safe distance during the operation of the machine to prevent injuries when the cables and chains are broken.
DON'TS
1.Do not install the remote control with the same frequency as this machine within 100 meters to prevent accidental action.
2.The steel cable selected for hoisting the machine should match the hoisting load.
3.It is strictly prohibited to install temporary power supply in places with explosion or fire hazard. The power supply capacity should match the power of the machine.
4.The power supply used by the machine is three-phase four-wire system, the ground wire (PE) can only be grounded and cannot be connected to neutral, otherwise the equipment will not be powered on. The connection power cable between the ground power supply and the machine should match the total power of the machine.
5.This machine has no explosion – proof function.
6.It is prohibited to operate the machine during the hoisting process of the crane. (power
supply of the machine should be cut off to prevent wrong operation.)